1 / 5
Kansas City CHIEFS Arrowhead Logo (FLAT REMIX) Chief's Design Football Team — image 1
1 / 5

Kansas City CHIEFS Arrowhead Logo (FLAT REMIX) Chief's Design Football Team

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I modified this logo to print flat against the build plate. Read instructions on how to reduce filament changes needed.

Rating
5 / 5
Likes
53
Downloads
428
Makes
2
Views
1,887
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

Important! Ensure files are oriented correctly, they should look correct when viewed from below the build plate. This may require mirroring the parts. setting the coordinates to 0, 0, 0, should center them properly.

A flat version of nonymoususer42's Chiefs logo. I reversed the models and made negative cutouts of each previous layer.

Each of the first 3 files is .6mm tall so 3 layers at .2mm layer height. You can scale up x and y to fill your build area but make sure that z dimension doesn't change

Very important to set Combing Mode to ALL so that the nozzle doesn't travel through previous prints.

After each file, swap the filament and extrude it out until the previous color is out. make sure to move all the axis away from the limit switches so that the printer properly homes at the beginning of each print.

If done properly you can leave each of the previous prints on the buildplate and the final KC4Flat file will seal them all together.

If your printer uses a probe to level before each print it can be difficult to print each file successively. It may be possible to splice the g-code together but I recommend using SuperSlicer, if the dimensions of the print head are set properly you can nest the separate files and still set it to print the file sequentially. If you set multiple tool heads and alternate the colors of the files you can swap the color between each one. I've found that printing each color up to .6mm high doesn't impact previous printed areas.

Leave comments if any help is needed.

Category: 2D Art

Tags