Tool holders for Hirsch adjustable tool hanger rails
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I have several Hirsch tool rails that are used for garden tools. New clips / brackets are needed to replace the old.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
The clips for the Hirsch tool rails keep breaking and disappearing. So I designed some new ones that can be printed that are much more robust. When I started the design, I intended to use PC-CF but after doing the PLA test prints I decided that ASA would be strong enough.
The second photo shows the original Hirsch clips. The lower one has the middle latch leg broken which was quite common. The first photo shows the clips mounted on the steel rail (enlarge to see more). 3rd photo shows the clips new clips that are close in style to the originals. The 4th shows a clip with a larger lip.
I used a 0.6mm nozzle, .32mm layer height. 4 walls for rigidity. Overture ASA red and Polymaker Polylight ASA white.