1 / 3
Volvo V40/S40 Turn Signal Lever Cap — image 1
1 / 3

Volvo V40/S40 Turn Signal Lever Cap

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A replacement cap/retainer for 2000-2002 Volvo V40 and S40 turn signal levers.

Rating
0 / 5
Likes
2
Downloads
9
Makes
0
Views
74
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

I recently became an owner of a 2000 Volvo V40 and had noticed that the turn signal would not turn off after completing the turn and straightening the steering wheel. Upon investigation it turns out that the factory switch uses 2 very thin plastic standoffs to hold a spring for the return. After 26 years well I suppose it got brittle and broke off. This is my attempt to recreate the cap to fix the broken spring standoffs. I used it on my car and it worked perfectly no more having to remember to manually turn off the signal now! 

I would recommend using ABS or ASA to print the part for heat resistance. (I used PETG but I am not sure it will withstand the Florida summer. I will update at the end of summer if it is still holding up.) 

I printed the part vertically using supports and it came out okay. 

To help retain the spring I used a little glue on the pegs. You could alternatively slightly melt the top with a hot knife or something like that. 

Last but not least, I was able to remove the old cover and install the new one without removing the steering wheel just rotate the wheel until you can access the 4 screws on the top. Because of the proximity to the steering wheel and the air bag though I would highly recommend taking some precautions before messing with it.  

Tags