1 / 1
CM200ei extendo palm shelf
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
taller palm shelf for the Morini CM200ei. right hand grip. Compliant to 2026 ISSF rules change re. angle.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
needed a taller palm shelf, adds around 10-15cm to the old one. The bolt angle is a little off but it works good enough. It fits the grip a little weird but it should work fine. The angle and radius at the end of the palm shelf was made to conform to the new 2026 ISSF rules. Needs a <=9mm dia. M4 washer for the hex screw.
Printed in Matte PETG upside down (ie the top surface is printed against the build plate) with 3mm thick bottom layer to allow some sanding.