Storage Box with Magnetic Lid
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.01 – €3.68 net (excluding VAT)
For file: Box with 3mm magnet lid.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.35 excluding VAT (range midpoint).
- Weight reported by the author
- 70 g
- Print time reported by the author
- 2 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This storage box features a removable lid with 3mm magnet inserts to help keep the lid securely closed.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Designed by LayerWorks 3D
This storage box features a removable lid with 3mm magnet inserts to help keep the lid securely closed. The design is simple, practical, and ideal for storing small parts, accessories, hobby items, and more.
Printing Information
Printer: Bambu Lab A1
Material: PLA+
No supports required (if applicable)
Recommended layer height: 0.20mm
Assembly
The lid and box include 3mm magnet insert holes.
Test fit the magnets before gluing.
Ensure the magnets are oriented correctly and attract each other rather than repel.
Apply a small amount of glue to each magnet recess.
Insert the magnets and allow the glue to fully cure before use.
⚠ Important: Double-check magnet polarity before gluing. Once installed incorrectly, the lid may repel instead of connect to the box.
Thank you for downloading and printing this design. If you enjoy the model, please consider leaving a rating and sharing your print photos.