1 / 1
No Support Marbles | Snap-fit
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Another marble/kicker/billards ball that prints in two halves without support und simply snaps together.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 26
- Makes
- 0
- Views
- 76
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
No Support Marbles
I needed some bigger marbles for my Outdoor Marble Run and found the existing ones not entirely convincing 😉 So here is my try for easiest printing and best quality. Tested with PETG.
10 mm & 20 mm diameter versions (moderately scalable)
Print with no supports, thin layers and Seam Position > Random for smooth rolling.
Adjust the weight with more or less infill. For marble run I used 100%.
Assembly
Place the clamp between the halves and press them together until it clicks.
