Inspired CZ Shadow 2 ACE Shooting Simulator for Meta Quest
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Complete support for right controller of Meta Quest 3 Inspred to CZ SShadow 2 pistol
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 90
- Makes
- 0
- Views
- 533
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- GNU General Public License v2.0
After watching a lot of YouTube clips, I was really curious to try the ACE dynamic shooting simulator. The only thing holding me back was the cost of the "gun": $200 just to try something that might disappoint me was too much. Eventually, I found several 3D printing projects online and created remixes to suit my needs. This is a remix of two different projects, one for the frame and the other for the FCU. For the frame, I cut off the protruding part of the magazine to simplify positioning on the print bed. The cutted magazine will be glued. For the FCU, I modified the original Glock trigger by crossing it with a CZ one. You certainly won't get the same trigger pull as the original ACE simulators, but in my opinion, the system is more than satisfactory and, above all, economical. I added an optional accessory for the mag release button to make it more effective. Also this have to be glued. To weigh down the toy, I used 4.5 cal air gun pellets and silicone sealant. All files are correctly positioned on the plate ready to be printed. I used a Creality K1, PETG, 5 walls, 15% infill, 0.4 nozzle and 0.2 layers. For sure also PLA have no problem.
Required: 1 x 3x30 pin, 1x3x25 pin 3 x 3x20 pins, 1 x 3x5 grub screw, 2 x 5x15 springs, 4.5 mm cal. steel pellets, silicone sealant.
It is necessary to thread the FCU with an M3 tap to accommodate the grub screw to lock the controller block.