Direct drive extruder conversion for prusa mini Equipped with REVO micro hotend
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Direct drive extruder conversion for prusa mini Equipped with REVO micro hotend
- Rating
- 5 / 5
- Likes
- 100
- Downloads
- 339
- Makes
- 8
- Views
- 4,560
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Direct drive sherpa mini extruder conversion for prusa mini Equipped with E3D REVO micro hotend or CHC mini hotend from Triangle-lab
Sherpa mini is a super light weight about 117gram extruder. There is no visible effect on print results at normal speeds after conversion. the revo micro holder here is exactly the same as the original except for the addition of a screw hole for better firmness. If you have already installed the original revo mirco holder there is no need to replace it.
Get a Sherba mini extruder:
https://www.aliexpress.com/item/1005002487727392.htm
CHC mini hotend from Triangle-lab:
https://www.aliexpress.com/item/1005004164941288.html
Sherba mini extruder designer:
https://github.com/Annex-Engineering/Sherpa\_Mini-Extruder
E3D revo micro prusa mini upgrade:
https://www.printables.com/model/151007-prusa-mini-upgrade-v2-e3d-revo-micro
Z-top part for Prevent collision with sherpa mini extruder motor from Daniel
https://www.printables.com/model/72190-mini-z-top-fur-prusa-mini-sherpa-extruder