Let's Get Spooky - Summerween Hueforge

Add a touch of humor and charm to your spooky décor with the Let’s Get Spooky – Trick-or-Treat Ducks design. Featuring three ducks in costume—a mummy, a ghost holding a black cat, and a witch with a potion—this artwork is full of festive Halloween spirit. Surrounded by flying bats, autumn leaves, and pumpkins, it’s a playful nod to trick-or-treating fun. Perfect for Halloween lovers, farmhouse-style décor, or anyone who enjoys a mix of cozy and whimsical spooks.

Project: Let's Get Spooky.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.16mm and the Actual Thickness is 2mm

Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#e0a8bb PLA PolyTerra Sakura Pink Transmission Distance: 2.8
#9d432c PLA BambuLab Basic Brown Transmission Distance: 2
#ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5
#e4bb4c PLA Overture Matte Yellow Transmission Distance: 3.6
#cbc6b8 PLA BambuLab Matte Bone White Transmission Distance: 1.6
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 7 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Sakura Pink
At layer #10 (0.88mm) swap to Brown
At layer #13 (1.12mm) swap to Pumpkin Orange
At layer #18 (1.52mm) swap to Yellow
At layer #20 (1.68mm) swap to Bone White
At layer #22 (1.84mm) swap to Ivory White for the rest.

Please note, a height modifier was applied to ensure a thicker base - this results in the layer numbers being offset by 3 layers, however the heights remain consistent.

One AMS? No problem! There is a pause included before the 4th color is completed - one method to utilize one AMS is to assign the additional colors to previously used slots when sending your print. Here is an example of my preferred method and strategy:

Arrange the filaments in the AMS in order according to the print.   Assign the 5th and subsequent colors to the AMS numerically.   At the pause, replace the color in slot #1 with the 5th color, resume printing.   If you have more than one AMS or are manually changing filaments,  ensure you have removed the pause before printing.

This print is part of a coordinated Hueforge series by Manic 3D Prints, designed to showcase a classic Halloween aesthetic using just 4–5 filament colors. It ties together the recurring “Summerween Vibes” theme while still leaving room for the playful ghost, witchy, and squad designs included in the set. Mix and match panels for a seamless look across your shelves, or gallery wall this spooky season!

🎃👻🌞 Hueforge: Spooky Summerween Collection 🌊🕷🦇

Want to sell your physical prints or access to the entire collection? A commercial and full access license is available through my profile.

This model was created by Manic 3D Prints using Hueforge, based on a concept and idea fully developed by us. The source image was generated with the help of digital tools to bring our vision to life. The 3D model itself was entirely designed and rendered by us using Hueforge as part of our original creative process.