1 / 1
2011 9mm Speed Loader
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mesh patterened loader that can print without support. Designed using factory magazine that came with Tisas DS9.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 34
- Makes
- 0
- Views
- 110
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial
Designed using Tisas 1911 DS Duty 9mm Gen 2's magazine, which i believe is made by checkmate and identical with other 2011/prodigy/staccato models.
Hex mesh pattern for saving materials.
Walls are 2mm thick.
When printed up-side-down with brim and glue on bed, most overhangs are less than 62-degree with the exception of hex mesh. One edge of the hex mesh could reach 77-degrees. I was able to print with PLA with no support.