ZOYI ZT-R02 20mm Macro Lens Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Snap-on ZnSe macro lens adapter for ZOYI ZT-R02 thermal multimeter — 20mm parametric via OpenSCAD
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
ZOYI ZT-R02 20mm Macro Lens Clip
Clip-on adapter that holds a 20 mm ZnSe lens over the ZOYI ZT-R02's thermal sensor for close-up PCB thermography.
Two versions included: short arms and full-length arms. Both grip fine — only a few grams and a couple of minutes apart, so it's down to looks.
Lens: any 20 mm ZnSe focusing lens (cheap CO2-laser optics work). Curved face toward the scene or just try both ways and keep the sharper.
Print: PETG, 0.2 mm, 3–4 perimeters, 100% infill. Legs-down, minimal support.
Tweak the fit: parametric OpenSCAD.
Often rebadged — ZOTEK / BSIDE units share the same body.
This model was designed together with AI – Claude Opus 4.8 by Anthropic. The ideas, measurements and design decisions are all mine; Claude turned them into OpenSCAD code and we went back and forth many times, refining and double-checking every detail along the way.
I exported the STL files myself, straight from that code in OpenSCAD – so there's no AI-generated mesh here, just plain, readable code turned into geometry. What you print is exactly what the code describes, nothing more.
And of course, it's been printed and tested in real life.
