Bipod Air Rifle (with stock) Support - Adjustable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Provides a stable platform to sight and shoot your rifle.
- Rating
- 3 / 5
- Likes
- 41
- Downloads
- 142
- Makes
- 0
- Views
- 1,271
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
Print in 0.16mm layer, 5mm brim no support except for:
The slider - print on side with the hole rising through the model and support the angled tip.
The stock support - lay on side, support to the overhanging section that is not sat on the print bed.
The feet - This needs to be printed point down onto the bed with supports.
All 15% infill bar the dowels, nut ferrule and bolts which were printed solid (100% infill)
Note - The securing nut and ferrule single stl file need to be model split before printing to move the ferrule onto the print bed
The bipod design allows for feet lowering to level the rifle on uneven standing. The printing tolerances are tight so the feet will not drop easily but they can be eased in and out with due care.