Desiccant Box 100x200
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
100x200 basic desiccant box with a screw hole.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 28
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Yes another desiccant box! I didn't like what I was finding so I decided to make my own. It's a basic 100x200 box that's designed to be easy to print. In lieu of a latching mechanism, there is a spot for a 4-20 thread forming screw to lock the lid in place. There are two versions, one with slots on the bottom and one with a solid bottom (the solid bottom cuts 30 minutes off of print time and actually uses 1 less gram of filament at the settings I used). I printed in PLA+ 3 walls, 3 top and bottom layers, 10% gyroid infill. The slots are 1.8mm wide, the beads I use are 2-3mm. I used these screws https://www.amazon.com/dp/B00GDYYJY0?ref=ppx_yo2ov_dt_b_fed_asin_title