Prusa Core One L toolbox
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For Core ONE L
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 113
- Makes
- 5
- Views
- 701
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Same as the Core One toolbox, just enlarged for the L model
This is a highly modified version of the original CORE ONE toolbox, adapted to fit the CORE ONE L. The door accommodates 2 sheet metal bed plates.
V2.0 (The new version 16.09.2026 ): No gluing of parts is required—I have designed snap-fits to hold everything together. The door closes using magnets located at the top and bottom—specifically, two holes at the top and two at the bottom (four in total). The holes for the magnets are 6 x 20 x 2.5 mm. (you can use any magnets that fit into the holes; for example, I used round magnets with a diameter of 6mm and a thickness of 2.5mm).
The tool box attaches to the 3D printer's sheet metal using screws.V1.0 (The previous version 04.06.2026 ): Requires gluing the parts together. The door closes with snap-fits, and no magnets are used anywhere.
The tool box attaches to the 3D printer's sheet metal using screws.
The required fasteners for all versions are:
4pcs M3x8mm screws
2pcs M3x20mm screws
4pcs M3x5mm inserts
The required magnets for V2.0 are:
any type of magnet that fits into a hole 6x20x2,5мм
V2.0 photos
V1.0 photos
