SD2IEC for FaszinationC64 #2030 #2031
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 3-part model for the SD2IEC #2030 and #2031
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 225
- Makes
- 0
- Views
- 1,210
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Use the screws of the display to fix the case to the module.
The holes for the screws have to be drilled by you, but they are marked and can be found easily. Holes left by the printer would result in a messy print (at least for FDM).
While the feet can be attached (as seen on some pictures here), I suggest leaving them away. With the feet attached, the additional height introduced by the enclosure will probably not stick into the computer correctly anymore.
The buttons are just sticked on top of the original buttons.
This can be printed without support. Just flip the upper half upside down.