1 / 7
Carbon 13 Metal Hero Jaspion/Juspion — image 1
1 / 7

Carbon 13 Metal Hero Jaspion/Juspion

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Jaspion/Juspion remix for Carbon 13 body and joints.

Rating
0 / 5
Likes
38
Downloads
107
Makes
0
Views
592
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Description

Metal Hero Jaspion/Juspion remix using Carbon 13 body and joints.

Printing:

For the joints parts, print with ABS/ASA/PETG. Do not print the joints with PLA.

0.4mm nozzle, layer height .2mm and 15% infill. Variable Layer Height (.08 ~ .2mm) for the head and chest to reduce visible layer lines on the top layer.

Most parts requires supports and brim.

Assembly:

The construction sequence is the same as Carbon 13's.

Loose joints: apply a thin layer of clear nail polish or superglue.

Stiff joints: sand the peg or the male end of the joint.

Use needle-nose pliers to fit the abdominal part into the joint, as shown in the figure below:

Reference images for painting:

Metal Heroes Wiki: https://metalheroes.fandom.com/wiki/Juspion

Tags