VW Beetle DIY Herrod Helper brackets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Brackets for DIY Herrod Helper - use wood, plastic, or sheet metal for the spoiler itself.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
Designed this a few years ago for aerodynamic tests (only installed temporarily, is not currently on my car) to see what, if any, effect this style spoiler actually has. Someone asked for these files.
3D print 4x HH mount clamp, and 2x HH Bracket Left - one of them mirrored for the right side. Insert M5 nuts into the clamp pieces and use them to bolt the brackets onto the vents below the rear window - I did it in the 11th slot in from the side.
Measure, cut, and drill a suitable sheet of material for the spoiler itself - for my temporary tests I used 1/4" plywood, a more permanent arrangement could use a sheet of plastic or sheet metal.
These were made in Autodesk Inventor which I no longer have access to, so I can't modify/edit these.