Passthrough Flange
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flange for 75mm light blocking insert for hard or tent panel mounting
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 19
- Makes
- 0
- Views
- 102
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a flange for mounting this light blocker to a tent wall or to a hard box.
If you are using this on a tent put it where you want it, poke holes for the screws, screw the inner and outer flanges together with the tent. Then with a razor or knife puncture down into the chamfer and slice out the circle. In this way you'll end up with a clean circle that wont leave a flap that interferes with the blocker, which you should be removing and cleaning regularly ;)
Also when the blocker is flush mounted towards the front there is a slight inset on the back. I like to use a little dab of hot glue as it holds it tight and is easy to break free come cleaning time. However even just friction fit it's tight enough that your fan shouldn't suck it in during normal operation.