1 / 5
Ultra Wheels Nevada LS Roller Blade Brake Support
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ultra Wheels Nevada LS Roller Blade Brake Support
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
A Brake Support for an 'Ultra Wheels' branded Nevada LS Roller Blade. Old piece had shattered and was no longer useable.
Print with flat rear-most part against build plate - should be printable without supports. I used 0.2mm layer height with no supports in PA6-CF.
Reminder: This is part of a personal safety device! It allows users to STOP! If it fails, personal injury can/will occur! Use at your own risk! You assume all responsibility for your print and your/others safety when using this design. Print in a high strength material (PLA will not survive!)