Tooth & Toothbrush
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tooth & Toothbrush multi part
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 28
- Makes
- 0
- Views
- 141
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Standard Digital File License
This 3D model was created with the help of AI 🤖.
I separated the eyes and the smile, as well as the bristles in the case of the toothbrush.
For the tooth model, the eyes are press-fit, and for the smile I needed glue and some pressure. Because of the tooth’s shape, the bottom area requires supports it's unavoidable that there will be some marks underneath. It’s also important to enable a brim so the little legs of the tooth don’t detach during printing.
General Printing Information
Tested on a Bambu Lab P1S
Material: eSun PLA+ White
Material: eSun PLA+ Black
Material: eSun PLA+ Red
Consider adding more supports below the tooth
Print Instructions
General Print Settings
Nozzle: 0.4 mm
Layer Height: 0.16 mm (Bambu High Quality profile)
Wall Loops / Perimeters: 2
Detect Thin Walls: Enabled
Infill: 15% Gyroid
Material: PLA+
Support Settings
Support Type: Tree Support
Support Angle: 33°
Support Placement: On build plate only