Bridge Flow and Density Calibration plates
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
OrcaSlice project with 6 plates combining different bridge flow (1-1.5) and bridge density (100%-110%) combinations
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 95
- Makes
- 0
- Views
- 325
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
It's really nothing fancy. I was just calibrating PLA filament with my 0.2 nozzle on my Centauri Carbon because bridges where coming out kind of awful with the default values of the filament profile, and I got to this video again learning how to correct it,
which led me to his project here.
Since configuring all of the plates with all of the combinations I made took me a while, I thought I'd share the OrcaSlicer project so maybe I save a bit of someone else's time adapting it to their printer.
Every plate has one bridge flow factor, ranging from 1 to 1.5, and six different bridge flow densities which are 100%, 102%, 104%, 106%, 108%, 110%.
This test should be made after proper temperature, flow rate and printing speed tests for your printer and filament combination have been made.