1 / 5
126 mm Ventilation / Heat Recovery Pipe Plug – Záslepka rekuperace — image 1
1 / 5

126 mm Ventilation / Heat Recovery Pipe Plug – Záslepka rekuperace

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Temporary 126 mm plug for ventilation / heat recovery pipes. Keeps dust and debris out of the duct during construction.

Rating
0 / 5
Likes
0
Downloads
8
Makes
0
Views
51
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

English

A simple temporary plug for a 126 mm inner diameter ventilation / heat recovery pipe.

I designed this plug to close an open heat recovery ventilation pipe during construction, before the final diffuser or air valve is installed. It helps keep dust, plaster, debris and insects out of the duct.

The model is intentionally simple, fast to print and easy to scale if your pipe has slightly different tolerances.

Česky

Jednoduchá dočasná záslepka pro potrubí rekuperace / vzduchotechniky s vnitřním průměrem přibližně 126 mm.

Model jsem navrhl pro zaslepení otevřeného potrubí během stavby, než bude nainstalovaný finální difuzor nebo talířový ventil. Pomáhá zabránit tomu, aby se do potrubí dostával prach, omítka, stavební nečistoty nebo hmyz.

Model je záměrně jednoduchý, rychlý na tisk a snadno škálovatelný, pokud má vaše potrubí trochu jiný skutečný rozměr.


Use case

  • Temporary closing of ventilation or heat recovery pipes

  • Protection against construction dust and debris

  • Useful before final diffuser / air valve installation

  • Designed for pipe openings with approx. 126 mm inner diameter

Použití

  • Dočasné zaslepení potrubí rekuperace nebo vzduchotechniky

  • Ochrana proti stavebnímu prachu a nečistotám

  • Vhodné před montáží finálního difuzoru nebo talířového ventilu

  • Navrženo pro otvory potrubí s vnitřním průměrem cca 126 mm


Dimensions

  • Intended pipe inner diameter: 126 mm

  • Plug diameter: approx. 124.2–125.3 mm tapered

  • Insertion depth: approx. 25 mm

  • Outer visible flange: approx. 145 mm

The plug has a slight taper, so it is easier to insert and more tolerant of small diameter differences.

Rozměry

  • Určeno pro vnitřní průměr potrubí: 126 mm

  • Průměr zasouvací části: cca 124,2–125,3 mm, lehce kuželový tvar

  • Hloubka zasunutí: cca 25 mm

  • Vnější viditelný límec: cca 145 mm

Zasouvací část je mírně kuželová, takže se záslepka lépe vkládá a lépe toleruje drobné rozdíly ve skutečném průměru potrubí.


Recommended print settings

  • Material: PETG/PLA

  • PLA: OK for temporary indoor use

  • ASA/ABS: OK for higher temperature areas

  • Layer height: 0.20 mm

  • Nozzle: 0.4 mm

  • Perimeters/walls: 3

  • Top/bottom layers: 4–5

  • Infill: 10–15 %

  • Supports: No

  • Brim: Optional

  • Print orientation: flat side on the build plate

Doporučené nastavení tisku

  • Materiál: doporučuji PETG - Ale staci i klidne PLA

  • PLA: vhodné pro dočasné použití v interiéru

  • ASA/ABS: vhodné pro místa s vyšší teplotou

  • Výška vrstvy: 0,20 mm

  • Tryska: 0,4 mm

  • Perimetry / stěny: 3

  • Horní/spodní vrstvy: 4–5

  • Výplň: 10–15 %

  • Podpěry: ne

  • Brim: volitelně

  • Orientace tisku: plochou stranou na podložku

Tags