1 / 2
EPAX X1 Wham Bam Flex Plate Z Offset
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Wham Bam Flexible Build System for SLA requires a minor Z offset mod for the EPAX X1. This is my design of the…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 200
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
The Wham Bam Flexible Build System for SLA requires a minor Z offset mod for the EPAX X1. This is my design of the easy to install part. It can be printed on your X1 before you start to install the FBS, or it can be printed on a FDM printer (0.1mm layer height). Note that you should use an opaque resin or filament and test when first installed to make sure the z optical sensor actually detects it. I used Elegoo Grey resin and didn't have a problem.
Category: 3D Printer Parts