Power Strip Holder for aluminum extrusion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple way to mount a power strip to some 3030 extrusion and route cables.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
UPDATE: 6/21/2026: V2 reduces the width and depth of the locking tab to better fit the v-slot channel on some versions of 3030. I sourced from 2 different amazon suppliers and one set is just slightly narrower than the other and caused the v1 version to not seat properly.
I picked up some simple power strips for an enclosure I am building and needed a way to mount them vertically to some 3030 extrusion.
I modeled up the placement of the mounting holes as well as a tab for the 3030 mount. I designed it so that it places the power strip about 10mm above the plane of the extrusion to allow for easy routing of the power cord back to the extrusion.
For printability, I chamfered all the edges and tapered the screw holes to allow for easy insertion of a pair of m3 bolts or screws to secure the power strip to the mount.
I included mounts for both 2020 and 3030 extrusion. In both m5 and m6 varieties.
Enjoy!