Modular Dish Drying Rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular Dish Drying Rack for Plates and Mugs
- Rating
- 0 / 5
- Likes
- 202
- Downloads
- 339
- Makes
- 1
- Views
- 3,086
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
A modular dish drying rack designed for drying and organizing plates, mugs, and other kitchen utensils.
The design is built around a 15×15 mm aluminum extrusion and allows the overall length of the rack to be customized to fit different kitchen spaces. The number of plate slots depends on the selected rack length.
Features
Modular design.
Adjustable height between levels.
Adjustable overall length.
Suitable for plates, mugs, and various kitchen utensils.
Rigid construction based on a 15×15 mm aluminum extrusion.
Easily adaptable to different kitchen layouts.
Dimensions
Width: 262 mm
Length: adjustable in 30 mm increments
Length adjustment is achieved by cutting the aluminum extrusion to the required size.
The number of plate sections depends on the selected rack length.
Required Hardware
1. Aluminum Extrusion
Use a 15×15 mm aluminum extrusion matching the supplied profile drawing or a very similar profile.
Length Calculation Example
As a reference, you can use the configuration designed for 12 plates.
This version requires:
2 pieces of 15×15 mm aluminum extrusion, 400 mm long
4 pieces of 15×15 mm aluminum extrusion, 365 mm long
The dimensions above do not include the vertical support posts.
As the overall length of the rack changes, the number of plate slots changes accordingly. The rack length can be adjusted in 30 mm increments by using longer or shorter 15×15 mm aluminum extrusions, allowing the design to be customized for different capacities and available space.
2. Fasteners
M2.5×6 bolts — 10 pcs
M2.5 nuts — 10 pcs
3. Water Trays
Width: 200–225 mm
Length: depends on the chosen rack size
Quantity: 2 pcs
Printing Recommendations
Recommended materials: PETG, ASA, or other moisture-resistant filaments.
PLA can be used, but PETG is recommended for long-term use in humid environments.
Use at least 3–4 perimeters for improved strength.
20–30% infill is recommended.
Notes
Designed for drying and organizing cutlery and kitchen utensils.
For best results, periodically empty and clean the water tray.
Food-safe printing depends on your filament, printer, and post-processing methods.
Make sure all fasteners are securely tightened before use.