FabScan CUBE Turntable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A complete turntable with holder that mounts on the stepper motor shaft. Stick a M5 nut in the slot and a M5 screw to…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 23
- Makes
- 0
- Views
- 178
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
A complete turntable with holder that mounts on the stepper motor shaft. Stick a M5 nut in the slot and a M5 screw to hold it firmly in place. This is inspired by the Stepper Shaft Thumbwheel though I remodeled this from scratch in Autodesk Fusion 360. In addition I added the thin cross lines on the top to show the center. I printed this with the top down on the bed, 0.2mm layers with 25% infill, 4/4/4 top/bottom/outer layers in beige PLA. I added manual support in the two sections of the horizontal hole.
Category: 3D Printer Accessories