Ecoflow Wave 2 Funnel Adapter Coldside 150mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you want to setup the Ecoflow Wave 2 outside the room, you need an adapter for the inlet of the cold side.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 54
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you want to setup the Ecoflow Wave 2 outside the room, you need an adapter for the inlet of the cold side.
The model contains two elements, the Plate (Platte) to mount the adapter to the inlet. This plate should be printed of a more flexible material, so that the lock doesn't break off. The second element (Funnel)is the funnel adapter for a 150mm hose, that should be glued to the plate after printing.
The funnel adapter is big. Depending on your printer it might be needed to be cut in printable peaces according to your printer setup. Use your slicer to do so.