Triumph Tiger 800XC Rear Mudguard V3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple mudguard for keeping the rear suspension cleaner.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 26
- Makes
- 1
- Views
- 106
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
I couldn't accept spending money on a rear mudguard for my motorcycle. The cheapest was around 60€ and the most expensive was over 200€. So I made a simple mudguard that will help keep the rear suspension cleaner. Printed in PETG / Nozzle - 0.6mm / Layer - 0.35mm
Just drill and tap two M5 threads in the swing arm using the model as a template. You might need an angled drill too for the holes.
Alternatively glue it somehow to the swing arm if you don't want to drill.
This model might work on other Tigers as well but can't confirm
update
I made a V3 version for printing with optimal strength and this can be printed completely without supports.
I suggest adding a brim or placing some helper disks if the part warps or doesn't stick to your printbed.