Gridfinity Eklind T handle hex key holders
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holders for the large Ecklind T handle hex key sets. The SAE and Metric sets are set to fit a 12" deep toolchest drawer
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 15
- Makes
- 0
- Views
- 103
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
The holders nest the T handle hex keys in stacks. This allows them to fit a mid level riser tool chest drawer for a 12" deep chest. The Metric blocks are for the "rear" set. The other is for the "front set". Slots are the same width between the blocks. I will have other bins in the drawer that will constrain the handles in the length of the drawer. Print 2 of each block.
Printed with a 0.6mm tungsten carbide nozzle, 15% cubic infill, .32mm layer height. Sunlu PLA+2.0 filament but with max volumetric speed limited to 12.5 to get consistent extrusions.