Schuberth SC2 Sena mount to Cardo Edge converter (easier print, nose/bracket cutout)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easier to print remix of the original, brackets/noses separated
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 82
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
As described, this is a remix that I needed to make the inner noses and brackets more stable.
As the wider parts of the cutouts are on the opposite sides, they might theoretically hold without glue, but decide for yourself if you want to take the risk.
The settings I used:
0.4mm nozzle
0.15mm layer height
grid support
make sure to add some support blockers at the corners of the inner side of the attachment pillars to make them easier to remove
material: ASA CF
print rather slow and make sure printhead fans are running, but are as slow as possible to reduce warping