Huawei P20 pro Phone-Camera Mount for analog microscopes
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.54 – €6.77 net (excluding VAT)
For file: hua-traeger_mic_0.15mm_PETG_MK3S_6h19m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.15 excluding VAT (range midpoint).
- Weight reported by the author
- 79 g
- Print time reported by the author
- 6.31 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Fixture for a Huawei P20 pro Phone to be mounted on an analog microscope to make magnified digital pictures.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 62
- Makes
- 0
- Views
- 1,279
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
I sometimes have to analyze small parts for my work, and due to the pandemic caused “work from home” situation, I don't have access to the digital microscope in the office.
At least I have an analog microscope at home, but I was not able to share my findings, because I was not able to make pictures of it.
I started to try to hold my phone camera over the ocular by hand, but it was hard to get a reasonable picture.
So I designed this fixture, to always have the camera lens of my phone well aligned to the ocular of the microscope. The results are always satisfying.
The ocular adapter has oversized holes for the mounting bolts, and also for the phone-plate. This allows alignment adjustments between the phone-camera lens and the ocular of the microscope, if need be.
For assembly you will need:
- 4x Bolts M3 x 10 (3x for the ocular adapter, 1x for the clamp)
- 4x Nuts M3 A/F 5.5 (standard) (3x for the ocular adapter, 1x for the clamp)
- 3x washer DIN9021 (oversized outer diameter)
The ocular of my microscope has an outer diameter of 37mm, and is approx. 30mm long. This might be not standard so I added the file for the ocular adapter as STEP, so you can adjust or redesign it according your needs.
Anyhow, the ocular adapter requires support for printing.