1 / 3
Bottle Rocket - 4th Of July - Double Remix — image 1
1 / 3

Bottle Rocket - 4th Of July - Double Remix

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Multi-part remix of a fireworks rocket model to produce a striped body. Includes a stand. Requires a dowel.

Rating
0 / 5
Likes
2
Downloads
8
Makes
0
Views
68
Reviews
0

Updated at source:

Model information

Category
Summer
License
Creative Commons — Attribution — Noncommercial

Bottle Rocket - 4th Of July - Double Remix

This is a remix of...

Bottle Rocket - 4th Of July

...posted by rwmech on September 01, 2023

https://www.thingiverse.com/thing:6197629

The second remix is of...

5mm shaft flag stand

...posted by JSquaredZ on August 02, 2022

https://www.thingiverse.com/thing:5447191

For the flag stand, the overall size is increased to 90 mm and the original 5 mm hole now accepts a 1/4" or 6 mm dowel. The larger stand footprint is necessary to provide a stable support for an object with CG offset from the point of support. Disregard the oval stand in one of the photos - it wasn't a good idea.

With the rocket I reworked the original one-piece body to print in seven parts, intended to produce a red and white striped rocket body. The pegs on the tops of the body sections are different from the one on the top of the original body so the original nosecone file will no longer fit. The new nosecone file is sized to fit the new body sections. The holes are generously deep so these parts can be printed without supports. A droopy hole ceiling will not effect the fit-up of the pieces.

I removed the slot in the side of the rocket body that originally held the stick and added a short socket to the bottom section suitable for a 1/4" or 6 mm dowel. The bottom section with the dowel pocket is the only unique one. The other body sections are the same except color.

There is roughly 1" of dowel in the rocket body socket and about 1" in the stand. An 8" piece of dowel works well and looks about right.

The rocket sections can just be stacked loose (if you don't have a cat) or can be glued together.

To produce the striped body, print one bottom section and six mid sections, three each in red and white.

The white stars on the nosecones in the image are just stickers.

Tags