1 / 4
IKEA LAMPLIG Trivet Slim Discrete Feet — image 1
1 / 4

IKEA LAMPLIG Trivet Slim Discrete Feet

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Slim and discrete replacement feet for the IKEA LAMPLIG trivet.

Rating
0 / 5
Likes
1
Downloads
3
Makes
0
Views
20
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

The original IKEA feet for their LAMPLIG trivet are large and unsightly. They also don't provide any impact protection from the metal ends accidentally being knocked sideways into our glass induction hob, which has resulted in chips in the glass. These solve the problem and look a lot neater than the originals.

They are best printed in TPU as they give a lot more grip and impact protection. However, they can be printed in PETG, PLA or any material of your choice.

I have provided two sets of files, as I found that TPU shrinks slightly when printed, and after prototyping in PETG they needed to be made smaller.

As they are a very tight friction fit they may need to be minimally scaled in your slicer to suit your printer.

Mine were printed in black Prusament FLEX TPU 95A on a Prusa i3 MK3S+ using 0.2mm layers, 5 perimeters and 30% gyroid infill, orientated with the rounded end cap upwards (see screenshot in photos).