Tapo C220 Wall Mount Bracket — 8-Position Rotation, Cable Management
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wall mount bracket for the Tapo C220 camera.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
A wall mount bracket for the Tapo C220 camera. Unlike fixed brackets, the top plate has mounting hole pairs every 45° — giving you 8 rotation positions to angle the camera and keep the cable naturally out of the way.
Uses the camera's own base, so no adapter needed. Just mount the bracket, attach the base.
Hardware Required:
2x M3 screws, up to 8mm length (ISO 7380 or similar)
Wall mounting uses original Tapo camera screws or any similar size
Print Settings:
Material: PLA for indoor use. PETG or ASA for outdoor installation
Walls: 3
Infill: 20%
Supports: No
Layer height: 0.2mm
Notes: May also fit other Tapo cameras that use the same base — if you try it with a different model, let me know in the comments and I'll update the compatibility list.