1 / 5
Bone Tankard — skeleton cup holder with femur staves & skull — image 1
1 / 5

Bone Tankard — skeleton cup holder with femur staves & skull

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A barrel-stave tankard built from bones: 24 randomized cartoon femurs as staves, a relief skull fused into the front

Rating
0 / 5
Likes
1
Downloads
8
Makes
0
Views
51
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution

A drink holder assembled from skeleton parts: a barrel-stave tankard where every stave is a cartoon femur. A dense ring of 24 randomized bones (full-length, 2-stack or 3-stack), a relief skull fused into the front wall, and a C-shaped handle built from a chain of bone links with knuckle balls fusing at every joint. Every bone tip ends below the rolled rim, so the top reads as one clean border.

What It Holds

  • 72 x 95 mm cavity: a glass, a 330 ml can, or use it straight as a pen cup or dice cup.

  • PLA is not food-safe, so it HOLDS a vessel rather than being one (koozie-tankard).

PRINT: upright, NO supports.

  • Bones are vertical and the handle links stay within 50 degrees of vertical, which prints clean on a Bambu. The skull is flattened to relief depth with a neck wedge filling the under-chin overhang.

  • Base disc 90 mm grounds every bone and carries adhesion. About 103 mm tall.

  • 0.2 mm layer, 3 walls, 15 percent infill. PLA or PETG.

Files

  • bone_tankard.stl: the tankard, one piece

  • bone_tankard.scad: full parametric source

CUSTOMISING (top of the .scad file): cavity diameter and height (330 ml can = 66.3 mm), number of staves, bone shaft and knuckle sizes, skull size, and the handle arc parameters.

Tags