1 / 6
Clawtrap - Jointed Figure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a "little" something I made up
- Rating
- 0 / 5
- Likes
- 48
- Downloads
- 144
- Makes
- 0
- Views
- 862
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Recommended settings: (100% scale and 0.4 nozzle)
Material | Parts | PETG, ABS, ASA |
Layer height | First layer | 0.2 mm |
Other layers | 0.15 mm | |
Number of perimeters | 2 | |
Infill | 20%, rectilinear | |
First layer speed | 25% of default | |
Elephant foot compensation | 0.15 mm | |
Supports | Yes | |
Brim | As needed (depends on bed adhesion) | |
Perimeter generator | Arachne | |
Additional settings | ☑ Print external perimeters first OR ☑ Only one perimeter on first layer | |
If possible, add a make! :)