Utilities Hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hanger bracket that screws to the wall and can carry multiple utilities.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 24
- Makes
- 0
- Views
- 120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
Challenge
Run the following utilities around my workshop:
Water (hot and cold) in 1/2 PEX
Compressed Air (in 3/4 PEX)
Network Cables
Speaker Cables (for surround sound)
Solution
I choose to put the heaviest bits closest to the wall (the two water lines). Next comes the compressed air line. Finally, the network cables are farthest from the wall.
The speaker wires were an afterthought. That's where I added the "underslung" slots. There is one slot for speaker wires and two additional slots for future expansion just in case.
Print Settings
I'm going with PLA / 15% infill as my garage is gloriously climate-controlled and PLA is cheap.
If your space gets hot, you will want to consider a more heat stable filament such as PETG, ABS, ASA, etc.