1 / 2
2" Rebar chair for #4 rebar and under
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Provides a 2" standoff for #4 (1/2") rebar and under.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 34
- Makes
- 0
- Views
- 86
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Uses ~8.49g filament using standard strength at 0.2 layer height with 0.4 nozzle
Seat is:
5/8" wide (1/2" + 1/8")
9/16" tall - so a 1/2" rebar will sit almost fully inside
Slight taper along height and flat bottom for good anchoring effect