1 / 1
Zinnia(No.3) flower HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created an zinnia flower HueForge.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print with 100% infill and a layer height of 0.08mm. The base layer should be 0.16mm.
Swap procedure: Initial filament: Green
Switch to the next filament at layer #6 (0.56mm): Chelsea Red
Switch to the next filament at layer #9 (0.8mm): Lipstick Red
Switch to the next filament at layer #14 (1.2mm): Yellow (Use until the final layer)