1 / 3
8n24 Movement Holder for NH35 case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a Movement Holder I printed for my Case i got off amazon.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 55
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Public Domain
Its a basic 3mm Movement holder for the Seagull/Miyota 8n24. 2mm is to hold to the dial and a 1mm Lip to grip the main body below the stem. Its a Bit Shallow for the 8215 Use the FreeCad File to make the lower pad to 3mm. You can change the OD and ID of the Sketches Each if you need according to your Case/Movement. Simple as it is I noticed a Lack of movement holders around. There are Dial pin Sketches according to their Tech Schematics for NH70 NH35 and the 8215/8n24 use them as you need.