1x2.5" & 3x3.5" HDD Enclosure for 2x5.25" Optical Bay (HP Z4 G4)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extended disc enclosure/adapter for dual 5.25" optical bays, mesh/vent pattern designed for HP Z4 G4 workstation
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 40
- Makes
- 0
- Views
- 168
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
Extra hard drive slots for an HP Z4 G4 Workstation (made to fit mine, including matching front panel mesh pattern), but should fit most pairs of 5.25" optical slots.
Print in temperature tolerant material (PETG tested, ABS/ASA likely suitable), 0.4mm nozzle (to handle small details) and around 15-25% infill (less will possibly absorb vibration better, but assemble less rigidly). 2-3 walls, thin sections may print less.
Fits 3 'full size' 3.5" hard drives and one 2.5" drive (9.5mm height for some HDDs, use an adapter for smaller HDDs or SSDs), may have fitted more 2.5" drives but only had 4 extra SATA ports available after populating the existing bays on my machine, and this left more room for airflow. Potential to increase the offset between the front panel mesh and drives to add a fan.
No rails/caddies to screw onto the drives, instead preferring a retaining machine screw with washer (standard M5x16 bolt/screw, button head for most clearance but whatever is most suitable; thumbscrew heads may be possible for tool-free removal) threading into the enclosure using printed thread forming ribs.
I didn't find many options for 3 drives in 2 slots, particularly not one-piece designs to suit the toolless pins on workstations like mine, so decided to create this approach, a one piece enclosure to install in the case, sliding drives in as-is & using normal metric machine screws to retain them instead of extra parts installed onto the drives with awkward short imperial screws.