Prusa Mini+ Display back cover USB + Switch
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.25 – €2.75 net (excluding VAT)
For file: Prusa Mini Backcover_0.15mm_PLA_MINI_2h42m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.50 excluding VAT (range midpoint).
- Weight reported by the author
- 27 g
- Print time reported by the author
- 2.71 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Another display backcover for the Prusa Mini with USB and On/Off Switch.
- Rating
- 5 / 5
- Likes
- 88
- Downloads
- 267
- Makes
- 10
- Views
- 1,570
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of several back covers to fit the usb extension linked below. I placed the USB and the on/off switch so they are not visible while still being well accessible. The on/off switch is on located on top, while the usb is on the side.
The cover with the 4 spacers need minimal support and print in under 3 hours.
You will need 4 screws. Either M3x14mm, M3x15mm or M3x16mm.
Link to the USB extension: https://www.amazon.de/-/en/gp/product/B097P84FYG/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&th=1
For the on/off switch you will have to extend the wires of the switch. This isn't hard to do, but still: Please only do so, if you know what you are doing. I take no responsibility for it.
Cover photo is from a Make kindfully provided by Citelis