Umbreon Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Umbreon
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 94.4x150mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.24mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#8e9089 PLA BambuLab Gray Transmission Distance: 2
#fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4
#ff6a13 PLA Bambulab Orange Transmission Distance: 5.6
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Blue Gray
At layer #10 (0.88mm) swap to Gray
At layer #16 (1.36mm) swap to Sunflower Yellow
At layer #18 (1.52mm) swap to Orange
At layer #20 (1.68mm) swap to Red
At layer #21 (1.76mm) swap to Jade White for the rest.