MagPump Magazine Adapter for Shield Plus Mags
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of DimaSN's Glock Magazine Adapter for the Magpump 9mm- adapted for the Shield Plus Mags
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Magpump didn't provide an adapter in the box for the Shield Plus so I took DimaSN's design and adapted it for this mag.
I included two step files one with snap tabs along the side cutouts and one with the standard slot if your more inclined to use regular supports when printing.
If printing the Snap tab version of the file press along the ears of the adapter and flex the side walls until the tabs break. Once the tabs are broken it will function as normal.
Recommend printing in the orientation shown in pictures.
I printed in PLA +, 4 walls, & 60% Infill