C270 Camera Mount for Mini+ Heatbed Corner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount to a Logitech C270 to the corner of a Prusa Mini+ and guide the USB cable around to the back of the bed.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 46
- Makes
- 5
- Views
- 537
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is a remix of Logitech C270 arm base for 30x30 aluminum extruded profile by Stanley
I made this so I could mount a Logitech C270 to the corner of the heated on my Prusa Mini+.
Printed in PETG at .20mm with a 15% infill. Supports maybe needed around the cable guide clamps.
The camera mount requires a M3x20 screw and a M3 hex nut, each arm requires a M3x16 screw and M3 hex nut, and for the parts that attach to the bed directly you'll need to replace the M3x8 screw with an M3x12 screw.
Finally after you mount your camera be sure to send the heat bed all the way back and the extruder all the way out to verify you have enough clearance.