1 / 2
Sink Faucet Tailpipe Nut - Threadless Self Tapping
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nut with finger holds, no threads, self tapping
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 28
- Makes
- 0
- Views
- 251
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Open Community License v1
IMPORTANT: You will either need to add your own threads or undersize the print so the hole of the nut is smaller than the threads. That way it can self tap when screwed on.
---------
If you need a nut for any type of pipe this will work great. Has strong finger holds that allow for twisting onto a pipe by hand.
There are no threads. This was made to be self tapped as you screw it on, since threads can vary wildly.
Default size is for a roughly a little bigger than a 1 inch tailpiece. Can be resized to work.