1 / 3
Drain Hair Snake — Barbed Clog Remover — image 1
1 / 3

Drain Hair Snake — Barbed Clog Remover

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Flat flexible barbed drain stick that rakes hair clogs out of a shower, bath, or sink drain.

Rating
5 / 5
Likes
0
Downloads
28
Makes
1
Views
71
Reviews
1

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution

A flat, flexible, barbed drain hair snake that rakes hair clogs out of a shower, bath, or sink drain. Push the tip down the drain, twist, and pull — the backward-pointing harpoon barbs grab the hair and drag the clog back out. One-piece print, no supports, no assembly, no loose parts.

Size: 240 × 30 × 2.6 mm (fits a 256 mm bed straight). Bump spine_len in the SCAD and rotate the plate ~45° on the bed for a longer reach.

Barb geometry. The barbs are harpoon-shaped: the tip-side edge is a long gentle ramp that slides in past the hair, while the handle-side edge is a short undercut that catches and holds on the pull. Barbs alternate left/right every half-pitch for staggered, full-width coverage. The handle ring doubles as a hang loop and as a stop so the strip can never disappear down the drain.

Print orientation. Lies flat on the bed; every barb is an in-plane cut, so it prints with no supports and no brim. The thin strip flexes out of plane to follow the bend of a P-trap.

Material — use PETG. The barbs are thin cantilevers. PETG is strongly preferred because it flexes; PLA is brittle and snaps the barbs on the first stubborn clog. Print walls thick, modest infill.

Parametric. Edit the variables at the top of drain_hair_snake.scad to retune: spine_len (barbed strip length), thickness (strip / flex member), barb_len (how far the barbs stick out), barb_back (undercut depth = catch strength), barb_pitch (spacing per side), and ring_od / ring_id (the handle loop).

The gallery shows the printed strip (white) plus isometric and top-down renders of the barb pattern and finger loop.

Tags