Trammel of Archimedes — Do-Nothing Machine Fidget
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A classic 'do-nothing machine': a gloriously useless desk fidget. Crank the knob and the arm traces a perfect ellipse…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
Trammel of Archimedes — a "do-nothing machine."
WHAT IT IS This is a completely useless, completely satisfying desk fidget. Crank the knob and the arm sweeps around, tracing a perfect ellipse over a groove engraved in the base. It does nothing else. There is no point. That is entirely the point. It is a funny little mechanical toy, nothing more.
PARTS (4 printed, 3 unique)
base.stl x1 — square base with the cross dovetail channels and the ellipse groove
slider.stl x2 — PRINT THIS TWICE. A dovetail puck that shuttles in a channel, with a snap post on top.
arm.stl x1 — the knobbed crank with two snap-fit bores All parts print flat on the bed, NO supports.
ASSEMBLY (order matters — sliders FIRST, then the arm)
Slide one slider into either dovetail channel from its open end. It should shuttle freely.
Slide the second slider into the OTHER channel. Both sliders must go in DIFFERENT rails — one in the left-right channel, one in the front-back channel. (Do not try to fit the arm before both sliders are seated, or nothing will line up.)
Press the arm straight down onto both slider posts. Each clicks past a snap ridge and is captive after that.
Crank the knob and watch it trace the ellipse. Forever. For no reason. (See the exploded image for the layout.)
Honest Warning
IT IS NOT PERFECTLY SMOOTH This is a toy, not a precision instrument. As the arm passes through the CROSSROAD where the two channels intersect, a slider occasionally fails to track straight back into its tunnel and needs a tiny nudge — it can catch on the lip of the crossing instead of gliding cleanly in. It still works and it is still fun, just do not expect glass-smooth motion the whole way around. A drop of dry PTFE or silicone lube on the channels helps.
Print Settings
Flat on the bed, no supports.
0.2 mm layers (0.12-0.16 mm for crisper channels), 3 walls, 15-20 % infill.
A brim helps nothing here; the base is large and sticks fine.
If the sliders bind, scale them down a hair or reprint with a touch more clearance (clr_side in the .scad).
The .scad is the full parametric source — change the ellipse size, base size or fit clearances and re-render.
