Stool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wooden stool with plastic parts Files attached so you can change the inner diameter.
- Rating
- 0 / 5
- Likes
- 34
- Downloads
- 61
- Makes
- 0
- Views
- 808
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This stool is made with broomsticks and an old IKEA bed rib bottom, but anything will do!
The legs of the pallet are 450 mm high and the horizontal ones are about 270 mm
The inner diameter of the plastic parts is 27.4 mm (The stick is 27 mm but 27.4 fits)
Standard sizes for round sticks are 27mm, 33 mm and such, however the inner diameter for the plastic parts should be at least 0.4 larger.
Before you begin, print test rings and try them on the stick!
Paint-on supports needed for TubePartCornerMid.
The parts on the photo was designed with a fix diameter so I have remade the models so that you can change the parameters yourself.
I have attached the Fusion 360 files so that you can alter the inner diameter and perhaps the thickness.
Note that when you change the values for the TubePartCornerMid the you have to flip the model yourself so that every part touches the ground otherwise the slicer will complain. (I have not been able to calculate the angle mathematically so all three parts touch the ground).