Reduction collet for Garmin Varia holder on luggagerack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reduction collet to mount Garmin Varia holder to bicycle luggage rack.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
When having luggage in the middle of the bike luggagerack (rather than just panniers) mounting the Garmin Varia rear light to the seatpost does not work well as it is not able to "see" over the mounted luggage. Designed a reduction collet from 31.6mm (seatpost diameter) down to about 12mm (diameter of the tubing of the luggage rack). I did use a few windings of electrical tape to prevent marring the luggage rack, and mount the holder securely (it does not have adequate friction as I printed it in hard PETG).
I used this Garmin Varia holder (recommended): https://www.amazon.nl/dp/B09Z7Q44P3
The bicycle is the Decathlon Riverside Touring 920, with the dedicated luggagerack.
Mounted upside down works best(see picture), as this will have the Garmin Varia near vertical. Two are needed so print 2x.
Works great!